Introduction
Initialize CO / Station Port Parameters
Initialize Exception Tables
Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press the PORT-STA/CO flexible button (FLASH 80, Button #4). The
following message displays:
IN ITIA LIZ E P OR T
P RE SS
HO LD
2. To initialize the Station/CO Port Parameters, press the HOLD button. A
confirmation tone is heard.
Description
Station numbers can be initialized and reset to their original default
values after the user has performed the Station Relocation Feature (636).
Programming Steps
1. Press the EXCEPTION TABLES flexible button (FLASH 80, Button #5).
The following message displays:
IN ITIA LIZ E E X TAB LES
P RE SS
HO LD
2. To initialize the Exception Tables, press the HOLD button. A
confirmation tone is heard.
Description
The Exception Tables Parameters, including the Allow/Deny Tables and
the Special Tables, may be initialized setting all tables to their original,
default values.
The following Tables are cleared returning to their default value upon
initializing the Exception Tables parameters:
- STA
/ CO
11-13