I Connections With An Extension Unit - Panasonic WJ-HD309 Operating Instructions Manual

I Connections with an extension unit

An example of connections is shown below when the unit is used together with an optional extension unit.
This unit can be connected with up to seven extension units.
Connect the EXT IN port on the rear panel of the extension unit and the EXT STORAGE port on the rear panel of this unit using
the cable provided with the optional extension unit.
Important:
• Use the cable provided with the optional extension unit.
• Fix the cables with the cable clamp (provided with each unit) to prevent disconnection or unstable connections that may
cause recording failures or an unstable system.
3
4
AUDIO IN
16
IN
OUT
16
EXT
IN OUT
2 1
How to fix the cable clamp
1
1
SERIAL ALARM
CASCADE
2 OUT
2
AUDIO OUT
MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTOROL
15 14 13 12 11 10 9
15 14 13 12 11 10 9
VIDEO
Cable (attached to the extension unit)
EXT
IN OUT
2 1
Cable Clamp
Fixing screw
Remove this screw from the
unit and fix the cables with the
cable clamp using the provided
screw for the cable clamp.
How to fix the cable clamp
Cable Clamp
Fixing screw
C O P
Y
Remove this screw from the
10 /1 00
BA SE
-T
EX IT
ST O RA
2
G E
1 unit and fix the cables with the
cable clamp using the provided
2
1
screw for the cable clamp.
MODE
COPY 1
2 1
DATA RS485(CAMERA) 10/100BASE-T EXT STORAGE
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
This unit
Extension unit (WJ-HDE300 series)
SIGNAL GND
POWER
AC IN
SIGNAL GND
POWER
AC IN
71