Connections (With S-Video Cable); Recording From Set Top Boxes (Stb) Or Other Satellite Receivers (Sat) - Panasonic DMR-E100H Operating Instructions Manual

∫ Before Use

Connections (with S-Video cable)

Connections and preparations for a TV with S-Video socket.
The conventional video sockets of DVD Recorder's output (input) a combination of the luminance signal (Y) and colour signal (C) which are
recorded on the disc. The S (Separate)-Video socket allows separate transmission of signals in order to obtain clearer pictures.
The connection with S-Video Cable can also be used for playback of any disc. The "S" in the "S-Video socket" stands for "SEPARATED Y/C"
not for "S-VHS".
Audio/Video
Output socket
AC Input
socket
AC Mains lead (supplied)

Recording from Set Top Boxes (STB) or other Satellite Receivers (SAT)

ª Recording video signal by "Sky personal Planner" and "External Link 1"
Functions
To record programmes from satellite receiver using "Sky Personal Planner" function together with the
"External Link1" function of this DVD Recorder:
≥Make connections as shown.
≥Change the settings in the SETUP menu as follows (page 61).
- "AV2 Input" set to "Video"
- "AV2 Connection" set to "Ext Link 1"
- "AV1 Output" set to "RGB" or "S-Video" or "Video" to suit the AV terminal of your TV.
≥Set up Personal Planner programmes as required.
≥Press [EXT LINK] on the main unit.
"External Link1" function can only be used with the "Sky Personal Planner" function for timer recording of
video signal from the "VCR Scart" terminal of the Sky Digital Set Top Box.
ª Recording RGB Signals
Most Satellite Receivers are capable of outputting RGB signals for viewing on TV through a Scart terminal (called "TV Scart" on a Sky Digital
STB).
In the case of a Sky Digital STB, recording of RGB signals from the "TV Scart" terminals is possible, but the "Personal Planner" function for
timer recording cannot be used in conjunction with the "External Link1" function of this DVD Recorder.
To record programmes by RGB signals:
≥Make connections as shown.
≥Set your Sky Digital STB to output "RGB" signals.
≥Change the settings in the SETUP menu as follows (page 61).
- "AV2 Input" set to "RGB"
- "AV2 Connection" set to "NORMAL"
- "AV1 Output" set to "RGB" or "S-Video" or "Video" to suit the AV terminal of your TV.
≥Set up Personal Planner programmes as required.
≥Follow the steps for setting up timer programming.
After setting Personal Planner programmes as required, Sky Digital STB must be left on (not set to
standby) to ensure continuous output of RGB signals.
It is not possible to use the "External Link 1" function of the DVD Recorder for timer recording of RGB
signals from the Sky Digital STB.
RF Input socket
S-Video
Output socket
RF Output
socket
S-Video cable
(not supplied)
15
Audio/video
Input socket
Aerial
(not supplied)
Aerial Input
socket
RF lead
(supplied)
S-Video Input
Audio/Video cables
socket
(supplied)
TV with S-Video
Input socket
(not supplied)
To AC Mains
socket
TV
AV
AV1
DVD-Recorder
AV2
VCR Scart
STB/SAT
TV
AV
AV1
DVD-Recorder
AV2
TV Scart
STB/SAT