Upgrading The Server - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Upgrading the server

Installation Guide
Set the OLDSYBASE_ASE variable to the SYBASE_ASE appropriate to your
older server. If you are upgrading from 12.0 for example, it should be
ASE-12_0. If your preupgrade version is earlier than 12.0, specify it as null:
set OLDSYBASE_ASE=""
This is required if you are using sybatch.exe to perform your upgrade.
Install the new Adaptive Server into the same directory as the Adaptive Server
you are upgrading.
This section covers the upgrade process, and outlines the following tasks:
• Installing version 15.0.2 software on the target computer. See Chapter 2,
"Installing Adaptive Server."
• Upgrading the servers with
• Post-upgrade tasks, including how to enable earlier versions of programs
and databases, allowing them to utilize the new version's functionality.
The installation procedure for Sybase Central and the Adaptive Server
Note
plug-in for Sybase Central has changed. Beginning with version 12.0, Adaptive
Server uses the following locations: Sybase Central in the x:\Program
Files\Sybase\Sybase Central\win32 directory and Adaptive Server plug-in for
Sybase Central in the %SYBASE% directory. Earlier versions used the
x:\sybtools directory. The Installer modifies your CLASSPATH, PATH,
Profiles, and Registry entries to these specific new locations.
To upgrade the server after you have installed the new software:
1 Run Start | Programs | Sybase | Adaptive Server Enterprise | Server Config.
2 Click Upgrade Adaptive Server in the Configure Sybase Servers window.
3 Enter the name of the old Sybase directory. Enter the name of the old
Adaptive Server directory, such as ASE-12_0. Enter the old OpenClient
Server directory such as OCS-12_0.
4 Click Continue.
5 In the Existing Servers window, select the Adaptive Server to upgrade and
choose Continue.
CHAPTER 5 Upgrading Adaptive Server
or .
syconfig sybatch
69