Ap Pe Nd Ix C Using Sybsystemprocs; Introduction - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

A P P E N D I X

Introduction

Installation Guide
Using sybsystemprocs
C
Topic
Introduction
Increasing the size of the sybsystemprocs database
Increasing device and database capacity for system procedures
Note sysprocsdev
is frequently referred to as the
Server attribute window, since it stores the
Verify that the
the recommended minimum size for
120MB, or enough free space to accommodate the existing
sybsystemprocs
plus an additional 10 percent of the largest catalog's size. The additional
10 percent is for logging upgrade changes.
You may need more space if you are adding user-defined stored
procedures. 120MBs accommodate additional internal data structures, but
does not account for the possibility of a large number of user-defined
system procedures.
If your
sybsystemprocs
you have enough room on the device to expand the database to the
required size, use the
size.
Use
sp_helpdb
1> sp_helpdb sybsystemprocs
2> go
is the default system name for this device. However, it
sybsystemprocs
database is large enough. For an upgrade,
sybsystemprocs
database, and the largest catalog that is to be upgraded,
database does not meet these requirements and
alter database
to determine the size of the
device, as in the Adaptive
sybsystemprocs
is the larger of
sybsystemprocs
command to increase the database
sybsystemprocs
Page
137
138
139
database.
database:
137