Pre-Installation Tasks For Sysam - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Operating system
Windows XP Professional
SP1 or higher
Windows 2003 Standard,
Enterprise, and Datacenter
Editions, SP1
Windows x64

Pre-installation tasks for SySAM

Installation Guide
Hardware
• Intel Pentium III 600 MHz or higher
• AMD Athlon 1 GHz or higher
• Intel Xeon EM64T
• AMD Opteron
Table 2-5: Disk space requirements for Windows platforms
Product
Adaptive Server typical install
Default databases created during install 153MB (for 2K page size Adaptive Server)
Total
Before you install Adaptive Server, you should:
1 Decide the SySAM license model you will use. The choices are:
• The unserved license model – gets licenses directly from the license
file. If you are using an unserved license, you should simply save the
license to the machine on which you have installed Adaptive Server.
• The served license model – uses a license server to manage the
allocation of your licenses to multiple machines. See the following for
more information.
For information about served and unserved licenses, and which model is
best suited for your environment, see Chapter 2, "Choosing a License
Model" in the Sybase Software Asset Management User's Guide.
2 If you plan to use a served license, you need a license server. Decide
whether it will be an existing license server or a new license server. The
license server need not be on the same machine or running on the same
operating system and architecture.
• If you are going to use an existing license server, you must know the
server host name and port number.
CHAPTER 2 Installing Adaptive Server
Supported protocols
• TCP
• IPX/SPX
• Named pipes (not supported for
LDAP server connections
• TCP
• IPX/SPX
• Named pipes (not supported for
LDAP server connections
Disk space requirements
360MB
1063MB
15