Sybase Adaptive Server Enterprise 15.0.2 Installation Manual page 154

Increasing device and database capacity for system procedures
140
and not exists (select vstart
from sysusages u2
where u2.dbid != u.dbid
and u2.vstart between d.low and d.high)
where:
• d.name – is the list of devices to remove from
• d.phyname – is the list of files to remove from your computer
The "not exists" clause in this query excludes any devices that are used
both by
sybsystemprocs
Note the names of the devices; you will need them in the steps.
2 Drop
sybsystemprocs
use master
go
drop database sybsystemprocs
go
In versions of Adaptive Server Enterprise prior to 15.0, you use
Note
to determine which device has a low through high virtual page
sysdevices
range that includes the vstart from Step 2. The device fragment whose
vstart you used is on that device
In the 15.0 version of Adaptive Server Enterprise select the
sysusages matching the
3 Find another existing device that meets the requirements for additional
free space, or use a
additional device for
1> use master
2> go
1> disk init
2> name = "sysprocsdev",
3> physname = "%SYBASE%\data\sysproc.dat",
4> vdevno = 9,
5> size = 51200
6> go
where %SYBASE%\data is the path to your system procedures device.
4 Create a
sybsystemprocs
for example:
and other databases.
:
retrieved in Step 1.
dbid
command similar to the following to create an
disk init
:
sybsystemprocs
database of the appropriate size on that device,
sysdevices
from
vdevno
Adaptive Server Enterprise