Getting Your Host Id - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Getting your host ID

Installation Guide
1 Once you have ordered a Sybase product you receive a welcome e-mail
that contains a URL to the SPDC site, as well as a user name and password.
If you have purchased your Sybase software from a Sybase reseller,
Note
you will receive a web key rather than an e-mail.
2 Click on the URL, and when prompted, enter the designated user name and
password. Your login is typically your e-mail address. If you have
forgotten your password, use the password finder on the SPDC login page.
To get your host ID:
1 Change to %SYBASE%\SYSAM-2_0\bin. Where %SYBASE% is the
Sybase installation directory.
2 Enter:
./lmutil lmhostid
lmutil lmhostid
On some platforms, the host ID is derived from the network adapter
Note
address. If your machine has multiple network adapters,
returns one host ID for each network adapter. The output may
lmhostid
look similar to:
The FLEXlm host ID of this machine
is ""0013023c8251 0015c507ea90""
Only use ONE from the list of hostids.
Choose one of these host IDs. Sybase recommends using the value
associated with the primary wired Ethernet adapter. Do not use values
associated with internal loop back adapters. If you cannot determine which
host ID to use from the
operating system command to get additional details to help make the
determination. See to the SPDC FAQ titled ,"What's my Host ID," or
"Appendix A" of the FLEXnet Licensing End User Guide for the exact
commands for your platform.
3 Save the host ID so you can use it later at SPDC. Your host ID is
platform-specific, but may be similar to:
CHAPTER 2
output, use the native
lmutil lmhostid
Installing Adaptive Server
lmutil
17