Sybase Adaptive Server Enterprise 15.0.2 Installation Manual page 59

Installation Guide
If you have not used
to specify another default device, the scripts install the sample databases on the
device. Sybase does not recommend this configuration because it uses
master
valuable space that is best used for system tables. Each sample database
requires 3MB on a 2K server, and multiples of 3MB on a 4K, 6K, 8K, and 16K
server on your database device.
To avoid installing sample databases on the
following:
• Use
sp_diskdefault
For information on
• Modify each sample database installation script to specify a different
device.
Running the database scripts
v
1 Start Adaptive Server.
2 Determine the type (raw partition, logical volume, operating system file,
and so on) and location of the device where you will be storing the
and databases. You will need to provide this information later.
pubs3
3 Make a copy of the original instpbs2 and instpbs3 scripts. Be sure you can
access the copies, in case you have problems with the edited scripts.
4 Use a text editor to edit the script, if necessary, to specify a default device
other than the
From the Adaptive Server scripts directory
(%SYBASE%\%SYBASE_ASE%\scripts), use
Server and run the script:
isql -Usa -P***** -Sserver_name -iscript_name
Where:
• server_name – represents the destination server for the database
• script_name – is the full path to and file name of the script to run
For example, to install
isql -Usa -P***** -SVIOLIN
-i %SYBASE%\%SYBASE_ASE%\scripts\instpbs2
5 To install the
data), run:
%SYBASE%\%SYBASE_ASE%\ isql -Usa -Ppassword
CHAPTER 3
to change the status of the
sp_diskdefault
to specify a default device other than the
, see the Reference Manual.
sp_diskdefault
device, or use
master
on a server named VIOLIN, enter:
pubs2
data associated with
image
Post-Installation Tasks
master
device, do one of the
master
.
sp_diskdefault
to log in to Adaptive
isql
( does not use
pubs2 pubs3
device or
device.
master
pubs2
image
45