Running The Sybatch Utility - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Variable, "PUT-THE-"
PATH-AND-NAME-OF-THE-BACKUP-ERRORLOG (Backup
Server)
PORT-NUMBER (Backup Server)
CHARACTERSET (Backup Server)
PUT-THE-PATH-AND-NAME-OF-THE-MONITOR-
ERRORLOG (Monitor Server)
PORT-NUMBER (Monitor Server)
NAME-OF-THE-ADAPTIVE-SERVER (Adaptive Server name)
NAME-OF-THE-MONITOR-SERVER (Monitor Server)

Running the sybatch utility

Installation Guide
To configure Adaptive Server with the
1 Open a Command Prompt window.
2 Enter the following, where sybatch_sample.res is the name of the resource
file:
cd %SYBASE%\%SYBASE_ASE%\sample\server
sybatch -r sybatch_ase.res
When you have completed resource file installation, go to Chapter 3, "Post-
Installation Tasks."
APPENDIX A Alternative Installation Methods
Description
The path in which Backup Server error logs are
placed, such as
c:\sybase\ASE-15_0\install\backup.log.
The port number by which to identify Backup
Server on the network, such as 5001.
The character set used by Backup Server, such
as CP 850.
The path in which Monitor Server error logs
are placed, such as c:\sybase\ASE-
15_0\install\ms.log.
The port number by which to identify Monitor
Server on the network, such as 5002.
The name of the default server to be used as a
model to create Monitor Server. Example
names include TEST-MS or USE-DEFAULT.
If you specified a custom Adaptive Server
name, add the extension "-MS" to the name.
The Monitor Server name. Example names
include TEST-MS or USE-DEFAULT. If you
specified a custom Adaptive Server name, add
the extension "-MS" to the name.
utility:
sybatch
129