Chapter 2 Installing Adaptive Server; Overview - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

C H A P T E R 2

Overview

Installation Guide
Installing Adaptive Server
This chapter provides instructions for installing a new Adaptive Server,
Backup Server, and Monitor Server.
Topic
Overview
System requirements
Pre-installation tasks for SySAM
Pre-installation tasks for Adaptive Server
Installing server components
Installing version 15.0.2 over an existing 15.x Adaptive Server
The installation process copies all of the files from the installation media
to the hard drive and then configures a base Adaptive Server. At the end
of the installation, the Adaptive Server and associated software is ready to
be customized for the user's environment – for example, creating devices,
databases and tables, and loading data.
The basic process for installing Adaptive Server is:
1 Perform pre-installation tasks related to license administration as
described in "Pre-installation tasks for SySAM" on page 15.
Warning! SySAM 2.0 enabled products work for an initial period
without a license. If you do not install a valid license for your
configuration in this grace period, the product ceases to function. For
general information about SySAM 2.0, see the Sybase Software Asset
Management User's Guide.
2 Perform the pre-installation tasks as described in "Pre-installation
tasks for Adaptive Server" on page 23.
Page
13
14
15
23
27
36
13