System Requirements - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

System requirements

System requirements
Hardware
HP9000/700, or HP9000/800, or 64-bit HP9000
D, K, V Series, (The PA8000 chip is required.)
HP
HPIA64, Intel Architecture-64 Itanium
Operating system
Windows 2000 Pro, Server,
Adv.Server and DataCenter
Edition SP4 or higher
14
3 Perform the installation using any of the methods described in
"Installation methods" on page 27.
4 Perform the post-installation tasks as described in Chapter 3, "Post-
Installation Tasks."
Check to make sure your system has the required version-level, RAM, and
network-protocol requirements for Adaptive Server. See the release bulletin for
your platform the latest information about required system patches.
Table 2-1: Server system requirements
Table 2-2: Disk space requirements for HP-UX 64-bit PA RISC platforms
Product
Adaptive Server typical install
Default databases created during install
Total
Table 2-3: Disk space requirements for HP-UX 64-bit Itanium platform
Product
Adaptive Server typical install
Default databases created during install
Total
Table 2-4: Server system requirements
Hardware
• Intel Pentium III 600 MHz or higher
• AMD Athlon 1 GHz or higher
Operating system
HP-UX 11.i running 64-bit
runtime kernel
HP-UX 11iV2
HPUX B.11.23
Supported protocols
SPX or TCP
SPX or TCP
SPX or TCP
Disk space requirements
700MB
150MB
1040MB
Disk space requirements
700MB
150MB
1040MB
Supported protocols
• TCP
• IPX/SPX
• Named pipes (not supported for
LDAP server connections
Adaptive Server Enterprise