Upgrading To Adaptive Server 15.0.2 - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Upgrading to Adaptive Server 15.0.2

If you do not have a sybsystemdb database
sybsystemprocs
Upgrading to Adaptive Server 15.0.2
68
If you do not have a
sybsystemdb
DTM applications, create a
If you will be using two-phase commit or DTM, you can either:
• Create a minimum-sized
• Create a
sybsystemdb
Approximately 25 percent of the database should be data storage, and 75
percent should be log storage.
is the default name for the device-holding database
sybprocsdev
. It is frequently referred to as the
sybsystemprocs
Adaptive Server.
Verify that the
sybsystemprocs
default size for
sybsystemprocs
accommodate the existing
that is to be upgraded, plus an additional 10 percent for logging upgrade
changes. You may need more space if you are adding user-defined stored
procedures. 124MB accommodates additional internal data structures, but does
not account for the possibility of a larger number of user-defined system
procedures.
Server Config cannot connect to an Adaptive Server that uses named
Note
pipe directory service. You must remove named pipe directory service from the
interfaces file before upgrading the Adaptive Server.
To assist with the upgrade process, Sybase recommends you set the
OLDSYBASE, OLDSYBASE_ASE, and OLDSYBASE_OCS environment
variables to point to the old installation of Adaptive Server. If you set these
environment variable to the old installation of the Adaptive Server, the upgrade
utility automatically populates input fields with the correct information as you
upgrade.
, and will not be using two-phase commit or
with a minimum of 4MB.
sybsystemdb
for upgrade and expand it later, or
sybsystemdb
of 5 to 20MB, depending on your expected usage.
database is large enough. For an upgrade, the
is 124MB, or enough free space to
database, and the largest catalog
sybsystemprocs
device in
sybsystemprocs
Adaptive Server Enterprise