Error Log Locations - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Problem
Attempts to create a server at
the network level.

Error log locations

Logs for installation
utilities
Logs for Sybase
servers
Installation Guide
Possible cause and solution
Use the Open Client and Open Server configuration utility to edit
%SYBASE%\ini\libtcl.cfg. The file should contain one of the following entries,
depending on the protocol you have chosen to use:
• NLWNSCK = Windows Socket driver
• NLMSNMP = Named Pipes driver
• NLNWLINK = spx/ipx driver
If the entry is missing or incorrect, enter the correct value.
Do not use a text editor, such as Notepad, to edit the libtcl.cfg file.
Note
The information in the error logs helps you determine the reason and possible
solution for an error message.
Table 7-2 lists the default error log locations for the installation, upgrade, and
setup utilities.
Table 7-2: Error log locations for installation utilities for Windows
Utility
InstallShield
sybatch
syconfig
Table 7-3 lists the default error log locations for each Sybase server.
Error log location
%SYBASE%\log.txt
%SYBASE%\%SYBASE_ASE%\init\logs\logs.*
%SYBASE%\%SYBASE_ASE%\init\logs\logs.*
CHAPTER 7 Troubleshooting
103