Sybase Adaptive Server Enterprise 15.0.2 Installation Manual page 39

Installation Guide
• Severity level of an event that will trigger mail. Your choices are:
• None
• Informational
• Warning
• Error
10 Verify that the operating system meets the version-level, RAM, and
network protocol requirements for your platform.
11 Adjust the operating system shared memory parameter.
For Adaptive Server to run, the operating system must be configured to
allow allocation of a shared memory segment at least as large as the
Adaptive Server
The default
total logical memory
(64MB) on the 32-bit operating system, and 45,056 2K pages (88MB) on
the 64-bit operating system. To adjust the shared memory value of the
operating system, use the System Administration Manager (SAM).
After you install Adaptive Server, you can change any configuration
parameter, procedure cache, and data cache size. This may require that you
increase the value of the configuration parameter
12
13
project.max-shm-memory=(priv, 17179869184, deny)
14 Adjust shared memory segments.
Depending on the number and types of devices you use for backup (dump)
and recovery (load), you may need to adjust the
parameter in the operating system configuration file to accommodate
concurrent Backup Server processes. The default number of shared
memory segments available for process attachments is 6.
15 Adjust shared memory segments.
Depending on the number and types of devices you use for backup (dump)
and recovery (load), you may need to adjust the
parameter in the operating system configuration file to accommodate
concurrent Backup Server processes. The default number of shared
memory segments available for process attachments is 6.
CHAPTER 2
configuration parameter.
total logical memory
parameter for HP is 32,768 2K pages
Installing Adaptive Server
max memory.
shared memory segment
shared memory segment
25