Interpubs Database - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Installing sample databases

interpubs database

46
-Sservername -i
%SYBASE%\%SYBASE_ASE%\scripts\instpix2
The
Note
image
two each in the PICT, TIFF, and Sun raster file formats. Run instpix2 script
only to use or test the
displaying
image
display the images after you have extracted them from the database.
For more information about running these scripts, see the configuration guide
for your platform.
is a database similar to
interpubs
This data contains 8-bit characters and is available for use at Adaptive Server
installations using the ISO 8859-1 (iso_1), ISO 8859-15 (iso15), Roman8, or
Roman9 (for HP-UX) character set. To display the French and German data
correctly, you must set up your terminal to display 8-bit characters.
Installing the interpubs database
v
1 Be sure iso_1, iso15, Roman8, Roman 9, or UTF-8 is installed as the
default character set or as an additional character set.
2 Determine the type (raw partition, logical volume, operating system file,
and so on) and location of the device where you will be storing the
database. You will need to provide this information later.
interpubs
3 Make a copy of the original installintpubs script. Be sure you can access
this copy, in case you experience problems with the edited script.
4 Use a text editor to edit the script, if necessary, to specify a default device
other than the
5 Execute the script, using the
with the correct character set:
isql -Usa -Ppassword -Sservername -Jroman8 -i
$SYBASE/$SYBASE_ASE/scripts/roman8/installintpubs
isql -Usa -Ppassword -Sservername -Jiso_1
-i %SYBASE%\%SYBASE_ASE\%scripts\iso_1\
installintpubs
data requires a fair amount of space—there are six pictures,
datatype. Sybase does not supply any tools for
image
data. You must use appropriate window graphics tools to
pubs2
device, or use
master
flag to ensure that the database is installed
-J
that contains French and German data.
.
sp_diskdefault
Adaptive Server Enterprise