Configuration Using Resource Files; Configuring From A Resource File - Sybase Adaptive Server Enterprise 15.0.2 Installation Manual

Configuration using resource files

Configuration using resource files

Configuring from a resource file

Editing a sample resource file
126
.\setupConsole -silent -options <responseFileName>
-W SybaseLicense.agreeToLicense=true
-G replaceNewerResponse="yesToAll"
You can create an Adaptive Server or Backup Server, using values specified in
a resource file that defines the attributes for the server.
Resource files are ASCII format template files that contain configuration
variables. To use the template files, edit the resource file, replace variables with
desired values, and execute the
variables to create servers.
Resource files allow you to create servers in batch mode. You can create
servers on multiple systems from the same resource file by editing a few values
in that file. Within a single resource file, you can create only one server at a
time.
The server files must already exist on the computer before the servers can be
created. Use procedures in Chapter 2, "Installing Adaptive Server."
To install an Adaptive Server or Backup Server using resource files:
1 Edit a resource file as described in "Configuring from a resource file" on
page 126.
2 Execute the
sybatch
"Running the sybatch utility" on page 129.
You can install Adaptive Server via a resource file. Use the sample resource file
provided with the software.
Sample resource files for creating Adaptive Server and Backup Server are
included in your Adaptive Server distribution in:
%SYBASE%\%SYBASE_ASE\sample\server directory.
utility. The
sybatch
utility, using the edited resource file as described in
utility uses the
sybatch
Adaptive Server Enterprise