Sybase Adaptive Server Enterprise 15.0.2 Installation Manual page 101

Method #2: BCP data
out and in
Method #3: Replacing
the binary
Installation Guide
3 Create devices and databases to match those in the 32-bit server. Make
sure that the
sysusages
http://my.sybase.com/detail?id=1324
Allow 10 percent additional space for the
Note
4 Dump the databases on the 32-bit server.
5 Load the databases to the 64-bit server.
6 If you have partitioned tables, update partition statistics.
7 Run checks on the 64-bit server and make sure they run cleanly.
dbcc
8 For information on upgrading compiled objects, see "Upgrading compiled
objects with dbcc upgrade_object" on page 109.
If you have DDL scripts to create devices, databases, tables, rules, stored
procedures, triggers, and views, you can use
database and into the new.
If you do not have DDL scripts, use the
for the Adaptive Server you are about to upgrade. See the Utility Guide.
1 Run checks on databases to verify data integrity.
dbcc
2 Use to extract all the data from all the tables in the databases.
bcp
3 Create a new 64-bit Adaptive Server in a new directory.
4 Create devices, databases, and tables.
5 Use to bulk copy data into tables.
bcp
6 Re-create all views, triggers, stored procedures.
7 Run checks on the 64-bit server and make sure they run cleanly.
dbcc
The third method requires you to modify some key files, re-create stored
procedures, then replace the binary.
1 Run checks (
dbcc
all databases in the 32-bit Adaptive Server and make sure they run cleanly.
2 In a new directory, copy the files for the 64-bit Adaptive Server.
3 Shut down the 32-bit server.
4 Copy the interfaces file and the configuration file from the 32-bit
$SYBASE directory to the 64-bit $SYBASE directory.
CHAPTER 5
mapping is correct. See document ID #1324
.
ddlgen
, ,
checkdb checkalloc checkcatalog
Upgrading Adaptive Server
sybsystemprocs
to move data out of the old
bcp
utility to re-create the schema
and
checkstorage
at
database.
) on
87