Monitor Output/Headphone Output - Yamaha AW4416 Operation Manual

Chapter1—Welcome to the world of the AW4416
By defeating these assignments, you can insert internal effects 1/2 into any
desired channel, or use AUX bus 7/8 or return channels 1/2 for other purposes.

Monitor output/headphone output

As monitoring jacks, the AW4416 provides MONITOR OUT jacks and a
PHONES jack. The types of signal that are output from these jacks will change as
follows, depending on the state of the AW4416.
1 Initial state
The signal of the stereo output channel will be output without change from the
MONITOR OUT jacks/PHONES jack.
B When the [SOLO] key is on
The signal of the channel selected by the [ON] key will be sent to the SOLO bus,
and output from the MONITOR OUT jacks/PHONES jack. At this time, all other
signals will be muted.
C When the TRACK [CUE] key is on
The direct output signal of the track selected by the [REC TRACK SELECT] key will
be output from the MONITOR OUT jacks/PHONES jack.
D When the internal metronome function is on
The metronome signal will be mixed with the output signals of 1–3.
Tip!
• The same signal is always sent from the MONITOR OUT jacks and the
• Whenever the [SOLO] key and the TRACK [CUE] key are both on, only the
30
— Operation Guide
AUX7 (EFF1),
AUX8 (EFF2)
46
INSERT SEND
PHONES jack. However, the level adjustment is independent; the output level
of the MONITOR OUT jacks is adjusted by the [MONITOR OUT] control, and
the output level of the PHONES jack is adjusted by the [PHONES] control.
TRACK [CUE] key will be valid.
RECORDER
DIRECT OUT 1
RECORDER
DIRECT OUT 16
STEREO L
STEREO R
SOLO L
SOLO R
ON
METRONOME
METER
EFFECT
2
METER
EFFECT
X 2
RECORDER
TRACK CUE
Logic
MIXER SOLO
Logic
ATT
RETURN 1/2
PHONES
PHONES
MONITOR
MONITOR
OUT
L
DA
+4dB
R