Erasing a pad performance
Here's how to erase a pad performance that you recorded.
1. In the SAMPLING PAD section, press the [EDIT] pad
The Trig. List page will appear.
2. Move the cursor to the ERASE menu, and press the [ENTER] key.
The parameters for the Erase command will appear. Each parameter has the fol-
lowing function.
PAD
Select the pad track that will be erased.
START
END
Specify the beginning (START) and end (END) of the area that will be erased from
the pad track selected by PAD.
EXECUTE
This button executes the Erase command.
ERASE button
Chapter12—Sampling pads
[F5] key.
201
— Operation Guide