Table of Contents
Advertisement
Using an External Speaker System for Playback (MAIN OUTPUT jacks, SUB
(AUX) OUTPUT jacks (PSR-SX900))
The MAIN OUTPUT jacks are used to send this instrument's output to a keyboard ampli-
fier, stereo sound system or mixing console. If you are connecting the instrument to a mono
sound system, use only the MAIN OUTPUT [L/L+R] jack. When only this jack is con-
nected (using a standard phone plug), the left and right channels are combined and output
through this jack—providing a convenient mono mix of the stereo sound.
You can use the instrument's [MASTER VOLUME] dial to adjust the volume of the sound
output to the external device.
Using the SUB (AUX) OUTPUT jacks (PSR-SX900)
You can use the SUB (AUX) OUTPUT jacks as SUB OUTPUT jacks, sending a specific part to any desired SUB
(AUX) OUTPUT jack. Also, you can use these jacks as AUX OUTPUT jacks by switching the function of the jacks to
"AUX."
The operation display can be called up via [MENU] [Line Out]. For details, refer to the Reference Manual on the
website.
NOTICE
Do not route the output from the SUB (AUX) OUTPUT jacks to the AUX IN jack. If you make this connection, the signal input at the AUX IN jack is
output from the SUB (AUX) OUTPUT jacks, possibly resulting in a feedback loop that will make normal performance impossible, and may even
damage the equipment.
NOTE
The output volume from SUB (AUX) OUTPUT jacks cannot be controlled by the MASTER VOLUME control.
102
PSR-SX900/SX700 Owner's Manual
Phone plug
Phone plug
(standard)
(standard)
Audio signal
Audio cable
Powered speaker
Input jack
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTICE
To avoid possible damage, first
turn on the power to the instru-
ment, then to the external device.
When turning off the power, first
turn off the power to the external
device, then to the instrument.
Since this instrument's power
may automatically be turned off
due to the Auto Power Off function
(page 21), turn off the power to
the external device, or disable
Auto Power Off when you do not
intend to operate the instrument.
Advertisement
Table of Contents
