Yamaha AW4416 Operation Manual page 434

Appendix
REV+FLANGE
Reverb and flanger effects in parallel.
Parameter
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
FB.GAIN –99 to +99%
WAVE Sine, Tri
REV/FLG 0–100%
MIX BAL. 0–100 [%]
REV->FLANGE
Reverb and flanger effects in series.
Parameter
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
FB.GAIN –99 to +99%
WAVE Sine, Tri
REV/FLG. 0–100%
MIX BAL. 0–100 [%]
18
Appendix–
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Modulation speed
Modulation depth
Modulation delay time
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
Modulation waveform
Reverb and flange balance (0% = flange, 100% = reverb)
Mix balance of the effects and dry sounds
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Modulation speed
Modulation depth
Modulation delay time
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
Modulation waveform
Reverb and flanged reverb balance (0% = flanged reverb, 100% =
reverb)
Mix balance of the effects and dry sounds
— Reference Guide
Description
Description