Output Patch; Internal Effects 1/2 - Yamaha AW4416 Operation Manual

Output patch

This section assigns the output signals to the STEREO OUT jacks, DIGITAL STE-
REO OUT jack, I/O cards installed in OPTION I/O slots 1/2, and OMNI OUT
jacks 1–4. The following types of signals can be selected.
STEREO
The stereo bus output signal that has passed through the stereo output channel.
BUS 1–8
The output signals of buses 1–8.
AUX 1–8
The output signals of buses 1–8.
CH DIRECT OUT 1–16
The direct output of input channels 1–16.
INSERT SEND
An insertion output for inserting an external effect into each channel.
RECORDER DIRECT OUT 1–16
The direct output of tracks 1–16 of the recorder section.
STEREO
BUS1~8
AUX1~8
CH DIRECT OUT1~16
INSERT SEND
RECORDER DIRECT
OUT 1~16

Internal effects 1/2

When the AW4416 is in its default state, the output of AUX bus 7/8 is sent to the
output patch section, and simultaneously assigned to the inputs of internal effects
1/2 as well. The outputs of effects 1/2 are respectively assigned to return channels
1/2.
Chapter1—Welcome to the world of the AW4416
DA
DA
DITHER
2
8
8
16
METER
46
16 DITHER
METER
DITHER
METER
METER
STEREO
OUT
L
10dBV
R
2
DIGITAL
STEREO OUT
OPTION OUT
8
X 2
SLOT1 OUT
8
SLOT2 OUT
OMNI OUT
DA
X 4
DA
0dB
— Operation Guide
29