Yamaha AW4416 Operation Manual page 432

Appendix
DYNA.FLANGE
Dynamically controlled flanger.
Parameter
SOURCE INPUT, MIDI
SENSE 0–100
FB.GAIN –99 to +99%
OFFSET 0–100
DIR. UP, DOWN
*1
DECAY
LSH F 21.2–8.00 k [Hz]
LSH G –12 to +12 [dB]
EQ F 100–8.00 k [Hz]
EQ G –12 to +12 [dB]
EQ Q 10–0.10
HSH F 50.0–16.0 k [Hz]
HSH G –12 to +12 [dB]
MIX BAL. 0–100 [%]
*1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz)
DYNA.PHASER
Dynamically controlled phaser.
Parameter
SOURCE INPUT, MIDI
SENSE 0–100
FB.GAIN –99 to +99%
OFFSET 0–100
STAGE 2, 4, 8, 10, 12, 14, 16
DIR. UP, DOWN
*1
DECAY
LSH F 21.2–8.00 k [Hz]
LSH G –12 to +12 [dB]
HSH F 50.0–16.0 k [Hz]
HSH G –12 to +12 [dB]
MIX BAL. 0–100 [%]
*1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48kHz)
16
Appendix–
Range
Control source: input signal or MIDI note on velocity
Sensitivity
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
Delay time offset
Upward or downward frequency change
Decay speed
Low-shelving filter frequency
Low-shelving filter gain
Parametric equalizer center frequency
Parametric equalizer gain
Parametric equalizer band width
High-shelving filter frequency
High-shelving filter gain
Mix balance of the effects and dry sounds
Range
Control source: input signal or MIDI note on velocity
Sensitivity
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
Lowest phase-shifted frequency offset
Number of phase shift stages
Upward or downward frequency change
Decay speed
Low-shelving filter frequency
Low-shelving filter gain
High-shelving filter frequency
High-shelving filter gain
Mix balance of the effects and dry sounds
— Reference Guide
Description
Description