Trimming A Sample - Yamaha AW4416 Operation Manual

Chapter12—Sampling pads

Trimming a sample

You can make fine adjustments to the playback start location and playback end
location of a sample assigned to a pad in order to eliminate unwanted portions at
the beginning and end.
Use the TRIM IN command to adjust the playback start location, and use the
TRIM OUT command to adjust the playback end location.
Trimming a sample will not increase the sample size that can be assigned to the
sampling pads.
1. In the SAMPLING PAD section, press the [EDIT] pad
The PAD Edit page will appear.
2. Move the cursor to the TRIM IN menu (if you wish to edit the playback
start location) or the TRIM OUT menu (if you wish to edit the playback
end location), and press the [ENTER] key.
190
— Operation Guide
Unwanted portions
Adjust the playback
start location
(TRIM IN)
Adjust the playback
end location
(TRIM OUT)
[F4].