Patching Input/Output Jacks To An Insert I/O Point - Yamaha AW4416 Operation Manual

Professional audio workstation

Hide thumbs Also See for AW4416:

Table of Contents

Chapter8—Patching

Patching input/output jacks to an

insert I/O point

You can patch various input/output jacks to the insert I/O point of a channel. This

patching method allows you to apply an external effect to a monitor channel dur-

ing mixdown.

1. Use the MIXING LAYER section keys and the [SEL] keys to select the

channel whose insert I/O point you wish to patch to input/output jacks.

2. Press the [VIEW] key

The display will show the VIEW screen CH View page. In the example shown

here, monitor channel 1 is selected.

3. Move the cursor to the ASSIGN button of the EFFECT INSERT ﬁeld, and

press the [ENTER] key.

The EFF.INSERT SETTING popup window will appear. The SEND and RTN. ﬁelds

of the popup window will respectively show the types of output jack and input

jack that are patched.

4. Move the cursor to the EXTERNAL button and press the [ENTER] key.

— Operation Guide

EFFECT INSERT

Chapters

Table of Contents