Inserting An Effect Into Monitor Channel 1 - Yamaha AW4416 Operation Manual

Chapter10—Internal effects
An effect that has been specified for insertion cannot again be used via AUX
send/return until you reassign it to the AUX bus in the EFFECT PATCH area.
If RTN 2 is set to "EFF 2 L/R" in the Patch IN page, performing this step will auto-
matically cancel the assignment.

Inserting an effect into monitor channel 1

1. Press [MONI] key
Monitor channel 1 will be selected.
2. Press the [VIEW] key
The VIEW screen CH View page will appear in the display.
3. Move the cursor to the ASSIGN button in the EFFECT INSERT area, and
press the [ENTER] key.
The EFF.INSERT SETTING popup window will appear. In this popup window, you
can use the following four buttons to select the type of effect that will be inserted.
• OFF .....................Effect insertion will be cancelled.
• INT.EFF1 ..............Insert internal effect 1.
• INT.EFF2 ..............Insert internal effect 2.
• EXTERNAL ...........Insert an external effect.
The INT.EFF1 and INT.EFF2 buttons cannot be turned on if the respective internal
effect 1/2 has not been disconnected from AUX send.
172
— Operation Guide
[SEL] key 1.
[F1] key.