Installation Procedure - Yamaha AW4416 Operation Manual

Professional audio workstation

Hide thumbs Also See for AW4416:

Table of Contents

Before you begin

Installation procedure

Please carefully read the cautions for installing optional devices, given at the

beginning of this manual.

1. Make sure that the power of the AW4416 is turned off. For safety's sake,

disconnect the power cable from the AC outlet.

2. From the OPTION I/O slot located on the rear panel of the AW4416,

remove the two screws that hold the cover in place.

Please keep the cover and screws you removed in a safe place.

3. Slide the I/O card along the rails inside the slot until it clicks into place.

4. Tighten the two screws included with the I/O card to fasten the card

Please note that if the screws are loose, the card may not be grounded correctly.

— Operation Guide

Table of Contents