Vauxhall VIVARO Owner's Manual page 145

140 Self-help
3. Tw ist bulb holder to separate from light
assem bly.
4. Renew bulb.
5. Push to install the bulb holder into the
lig ht a ssem bly - then twist to sec ure.
6. Check tha t the wiring harness is loca ted
correctly.
7. Locate light assembly into position,
ensuring that it is seated correctly .
8. Fit light assembly onto retaining pins
and replace 3 screws.
Reverse lights and fog tail light
1. Remove 2 screws (using the tool
sup plied) and remove light assembly.
2. Twist bulb housing to sep arate from light
assembly .
3. Renew bulb.
4. Push to install the bulb holder into the
light assembly - then twist to secure.
5. Install light assembly w ith 2 screw s.
Number plate ligh t
1. Remov e 2 screws (arrowed) and remove
lens.
2. Renew bulb.
3. Re-insta ll lens; repla ce screw s.