Fro nt turn signal indicator
1. Remove bulb holder from light by
rotating through 90º
2. Renew bulb
3. Install bulb holder in light.
Side repeater light
1. Release light clips from wing using a flat
screwdriv er and lift out.
2. Remove bulb holder from light by
rotating through 90º and renew bulb .
3. Install bulb holder in light and insta ll light
assembly into aperture.
Self-help
Rear brake, turn signal and tail
lights
1. Remov e 3 screws (using the tool
supplied).
2. Carefully pull light assem bly from
retaining pins on the outer side and
remove.
139
6