Vauxhall VIVARO Owner's Manual page 137

132 Self-help
1. Remove wheel trim, loosen the wheel
bolts with the ratchet and a dapter. The
ra tc het should turn anti-clockwise to
loosen the bolts - inv ert the ratchet if
necessary.
2. To ra ise vehicle, plac e lifting pad spigot
of the jack under the jack ing hole
loca ted nearest the wheel c oncerned.
3. Install adapter onto the jack and raise
the vehicle by turning the ratchet until
the wheel is c lear of the ground.
4. Remove wheel bolts and replac e wheel.
5. Refit wheel bolts and low er vehicle.
6. Tighten wheel bolts in criss-cross
sequence and refit w heel trim .
7. Stow the wheel, jacking equipment a nd
warning tria ngle 3 .
Hav e the new wheel balanced on the
vehicle a nd ha ve the torque of the wheel
bolts check ed a s soon as possible.
Tightening torque - see page 167.
Hav e d efec tiv e ty re repaired and
bala nced.