Figure 14 Radiosonde In The Gc25 With The Communication Cable; Connected - Vaisala RS92-SGP User Manual

User's Guide ______________________________________________________________________
CAUTION
26 __________________________________________________________________ M210295EN-H
2. Connect the communication cable to the Ground Check Set
interface in the radiosonde. Text "UP" on the connector faces
upwards.
Figure 14 Radiosonde in the GC25 with the
0705-026
Communication Cable Connected
3. Switch on the PC and start a new sounding with the sounding
system software. For detailed instructions, see the sounding system
documentation.
4. Switch on the Ground Check Set by pressing the power switch. The
green LED in the power switch is lit.
The sounding software goes through reconditioning, frequency
tuning, timer setting, and ground checking.
Do not press any buttons in the Ground Check Set while the sounding
software is performing.
5. When the sounding software is finished, it indicates that it is ready
for radiosonde release dy displaying a message. Remove the
radiosonde from the Ground Check Set and disconnect the
communication cable.