Preparing The Sounding; Figure 13 Vaisala Ground Check Set Gc25 - Vaisala RS92-SGP User Manual

Chapter 3 ________________________________________________________________ Operation

Preparing the Sounding

NOTE
VAISALA _______________________________________________________________________ 25
When preparing the sounding, Vaisala Ground Check Set GC25 is
connected to the sounding system via cable and operated with the help
of the sounding software.
If you are using DigiCORA® Sounding System MW21, software
version < 3.12, or MW15, MW12 or MW11, software version < 8.311,
refer to the Ground Check Set GC25 User's Guide for information on
using the GC25 in the stand-alone mode.
Figure 13 Vaisala Ground Check Set GC25
0705-025
1 = Chamber
2 = Display
3 = Buttons
4 = Communication cable
5 = Radiosonde tray
6 = Power switch
Follow these steps to prepare the sounding:
1. Open the chamber of the Ground Check Set and place the
radiosonde onto the radiosonde tray. Close the chamber.