User's Guide ______________________________________________________________________
40 __________________________________________________________________ M210295EN-H
needed to restrict the movement of the unwinder. For instructions, refer
to section
Optional Sounding Accessories on page
Attaching the Unwinder to the Balloon
Follow these steps to attach the unwinder directly to the balloon:
1.
Pass the unwinder hook through the loop created by the tied
balloon neck.
2.
Make sure that the hook comes out the other side, as shown in
Figure 33 on page
balloon.
If you are using a balloon with an integrated parachute, fasten the
parachute string poking out of the balloon neck to the unwinder.
Figure 33
Attaching the Unwinder to the Balloon
0705-042
If you use optional sounding accessories, follow these instructions to
attach the unwinder.
40. The unwinder is now attached firmly to the
20.