Installing The Heat Pump - Vaillant geoTHERM VWS Installation Instructions Manual

We recommend that the heat pump be transported with
the aid of a suitable barrow.
Fig. 4.7 Transporting the heat pump (pushcart)
a
Caution!
Risk of damage!
Find out the weight of your heat pump
from the Technical Data and make sure
that the transport equipment you select
is appropriately designed.
When using a barrow, take note:
• Only use the barrow on the rear side of the heat
pump, as the weight distribution is then the most fa-
vourable.
• Fasten the heat pump with a restraining strap.
• Use a ramp when pushing the barrow from the pallet,
e.g. a batten and a sturdy board.
Installation instructions geoTHERM VWS 0020046310_01
Assembly and installation 4
4.10

Installing the heat pump

0-10 mm
Fig. 4.8 Adjusting the feet
• Pay attention to the minimum wall clearances when
installing the heat pump (see Fig. 4.2).
• Align the heat pump horizontally by adjusting the feet.
17