Applicability Of The Manual; Ce Label; Intended Use - Vaillant geoTHERM VWS Installation Instructions Manual

1 Notes on the documentation
1.3

Applicability of the manual

These installation instructions apply exclusively to appli-
ances with the following part numbers:
Type name
VWS 61/2 230 V
VWS 81/2 230 V
VWS 101/2 230 V
Table 1.1 Type designations and article numbers
The part number of the equipment can be taken from
the identification plate.
1.4

CE label

With the CE mark, we confirm as equipment manufactu-
rers that the appliances in the geoTHERM range satisfy
the basic requirements of the following Directives:
– Electromagnetic Compatibility Directive (Council Di-
rective 89/336/EEC)
– Low voltage directive (73/23/EEC)
– EN 14511 (heat pumps with electrically-driven compres-
sors for heating, specifications for appliances for
space heating and for warming drinking water)
– EN 378 (safety and environmentally related specifica-
tions for refrigerating systems and heat pumps)
1.5

Intended use

The Vaillant geoTHERM heat pumps are state-of-the-art
appliances which have been constructed in accordance
with recognised safety regulations. Nevertheless, there
is still a risk of death or serious injury to the user or
others or of damage to the device and other property in
the event of improper use or use for which it is not in-
tended.
This unit is not intended for use by persons (including
children) having limited physical, sensory or mental ca-
pacities or who have inadequate experience and/or
knowledge, unless they are supervised by a person re-
sponsible for their safety or have been given instruc-
tions by him regarding the operation of the unit.
Children must be supervised to ensure that they do not
play with the unit.
The units are intended as heaters for closed hot-water
central heating installations and for hot water generati-
on. Any other use or extended use is considered to be
improper. The manufacturer or supplier is not liable for
any resulting damage. The user alone bears the risk.
4
Article number
0010005501
0010005502
0010005503
The appliances are intended for operation on a power
supply network with a system impedance Z
transfer point (house connection) of 0.16 ohms maxi-
mum.
Intended use includes the observance of the installation
manual.
a Caution!
Any improper use is forbidden.
The appliances must be installed by a heating engineer,
who is responsible for adhering to the existing regulati-
ons, rules and guidelines.
Installation instructions geoTHERM VWS 0020046310_01
at the
max