Removing The Cladding - Vaillant geoTHERM VWS Installation Instructions Manual

4 Assembly and installation
4.11

Removing the cladding

The cladding panels are screwed on and additionally
provided with retaining clips.
Fig. 4.9 Removing the upper cover
• Remove the pipe access cover, which is fastened with
retaining clips, by pulling it gently upwards.
• Unfasten the screws for the upper cover which are
concealed beneath it.
• Remove the upper cover in an upwards direction.
18
Fig. 4.10 Removing the front lower cladding
• Unfasten the two screws on the console frame and
pull it, together with the front lower cladding, away
from the casing.
Fig. 4.11 Removing the front upper cladding
• Unfasten the two screws on the front of the front
upper cladding and remove the cladding.
Installation instructions geoTHERM VWS 0020046310_01