Start-Up 7; General Points Regarding Start-Up - Vaillant geoTHERM VWS Installation Instructions Manual

Fig. 6.25 Fitting and connecting the operating console
• Connect the supply line to the control panel.
Fig. 6.26 Fitting the front panel of the operating console
• Push the front panel of the control panel on to the
frame.
Installation instructions geoTHERM VWS 0020046310_01
Electrical installation 6
7 Start-up
d
Danger!
Risk of injury!
The heat pump may only be put into ope-
ration after all the cladding sections
have been fitted.
7.1

General points regarding start-up

• Before putting the heat pump into operation, first
check the Start-up Checklist in Chap. 14.
The heat pump may only be started if all the points
noted there have been satisfied.
Before you actually start up the heat pump, familiarise
yourself with the controller interface described below.

Start-up 7

41