Vaillant geoTHERM VWS Installation Instructions Manual page 40

6 Electrical installation
Fig. 6.22 Fitting the operating console
• If you have mounted the vrnetDIALOG communication
unit, connect the connection cable to the controller
PCB (see Chap. 6.5).
Fig. 6.23 Fitting the front lower cladding
• Press the lower cladding panel into the spring retainer
on the casing and screw the panel frame to the casing
using the two screws, as shown in the illustration.
40
Fig. 6.24 Fitting the upper cover
• Attach the upper cover and screw it down securely
with the two associated screws.
• Press the pipe access cover into the spring retainer.
Installation instructions geoTHERM VWS 0020046310_01