Operating The Controller; Finding Your Way Around The Controller; Calling Up The Screens - Vaillant geoTHERM VWS Installation Instructions Manual

7 Start-up
7.2

Operating the controller

7.2.1

Finding your way around the controller

1
6
5
Fig. 7.1 Operating overview
Key
1 menu name
2 Cursor indicates the selected parameter
3 menu number
4 Dial ,
position parameter (turn), select parameter (press)
5 Dial ,
select menu (turn), activate special operation (press)
6 Information line (in the example a handling request)

7.2.2 Calling up the screens

The menus are identified by a number at the top right of
the display. You can access the next menu by turning
the dial. The numbers make it easier to find individual
menus during programming.
42
Basic data
Date
Day of week
Time
Set day
7.2.3 Typical operating sequence on the operator
level
• Turn the dial
required has been selected.
• Turn the dial
meter to be modified has
been selected.
• Press the dial
parameter to be modified.
The parameter will be high-
lighted on a dark background.
• Turn the dial
parameter setting value.
• Press the dial
setting value to be accepted.
• Repeat this sequence until all
the settings have been made.
Installation instructions geoTHERM VWS 0020046310_01
2
3
4
until the menu
until the para-
to mark the
to modify the
to mark the