Adjustment - Triumph Daytona 675 Handbook

Maintenance and Adjustment

Adjustment

1 Opening cable adjuster
2 Closing cable adjuster
3 Closing cable –
measurement point
4 Throttle grip (Daytona 675
shown)
5 Opening cable –
measurement point
Remove the seat.
82
Disconnect
(black) lead first.
Remove the fuel tank.
Remove the airbox.
Release
'opening' cable adjusters.
Rotate the 'opening' cable adjuster
at the throttle grip end such that it
has an equal amount of adjustment
in each direction.
Rotate the 'opening' cable adjuster
at the throttle body end of the cable
to give 0.08-0.12 in (2-3 mm) of
play at the throttle grip. Tighten the
locknut.
Make any minor adjustments as
necessary to give 0.08-0.12 in (2-3
mm) of play using the adjuster near
the throttle grip end of the cable.
Tighten the adjuster locknut.
With the throttle fully closed, ensure
that there is 0.08-0.12 in (2-3 mm)
of free play in the 'closing' cable at
the throttle cam attached to the
throttle bodies. If necessary, adjust
at the throttle body end in the same
way as the 'opening' cable, until
0.08-0.12 in (2-3 mm) of play is
present.
Tighten the adjuster locknuts.
free play
free play
the battery, negative
the locknuts on the