Chain Free - Movement Adjustment - Triumph Daytona 675 Handbook

Maintenance and Adjustment
Chain Free –
Adjustment
For Daytona 675
movement of the drive chain must
be in the range 1.37-1.57 in (35-
40 mm).
For Street Triple
movement of the drive chain must
be in the range 0.80-1.00 in (20-
25 mm).
2
1
cdlf
1 Adjuster bolt
2 Adjuster bolt locknut
3 Rear wheel spindle nut
Loosen the wheel spindle nut.
Release the locknuts on both the left
hand and right hand chain adjuster
bolts.
Moving both adjusters by an equal
amount, turn the adjuster bolts
clockwise to increase chain free
movement and counter-clockwise to
reduce chain free movement.
When the correct amount of chain
free movement has been set, push
86
Movement
the wheel into firm contact with the
adjuster.
locknuts to 20 lbf ft (27 Nm) and
the vertical
the rear
81 lbf ft (110 Nm).
Repeat the chain adjustment check.
Re-adjust if necessary.
the vertical
Operation of the motorcycle with
insecure adjuster locknuts or a
loose wheel spindle may result in
impaired stability and handling of
the
stability and handling may lead to
loss of control or an accident.
Check the rear brake effectiveness.
3
Rectify if necessary.
It is dangerous to operate the
motorcycle with defective brakes
and
authorized Triumph dealer take
remedial
attempt to ride the motorcycle
again. Failure to take remedial
action
efficiency leading to loss of control
or an accident.
Tighten both adjuster
wheel spindle nut
Warning
motorcycle. This impaired
Warning
you must have
action before
may reduce braking
to
your
you