Coolant Level Adjustment; Coolant Change; Radiator Hoses - Triumph Daytona 675 Handbook

Coolant Level Adjustment

Warning
Do not remove the expansion tank
or radiator pressure cap when the
engine is hot. When the engine is
hot, the coolant
expansion tank will be hot and also
under pressure. Contact with this
hot, pressurized coolant will cause
scalds and skin damage.
Allow the engine to cool.
Daytona 675
The expansion tank cap can be
removed from the left hand of the
motorcycle, between the rear of the
lower fairing and the frame.
Street Triple
Remove the seat to gain access to
the expansion tank.
Remove the cap from the expansion
tank, and add coolant
through the filler opening until the
level reaches the 'MAX' mark. Install
the cap.
NOTE
• If the coolant level is being
checked because
coolant has
also check the level in the
radiator and
necessary.
Maintenance and Adjustment
• In
alone can be added to the
cooling
the coolant must then be
changed and returned to the
correct mixture ratio using
distilled
coolant as soon as possible.
inside the

Coolant Change

Have the coolant changed by an
authorized
accordance
maintenance requirements.
Radiator and Hoses
Check the radiator hoses for cracks
or deterioration, and hose clips for
tightness
scheduled
requirements. Have your authorized
Triumph dealer replace any defective
items.
Check the radiator grille and fins for
obstructions by insects, leaves or
mud. Clean off any obstructions with
mixture
a stream of low-pressure water.
The fan operates automatically
when
the
Always keep hands and clothing
overheated,
away from the fan as contact with
the rotating fan can cause injury.
top-off if
an emergency, water
system. However,
water and
Triumph dealer
with scheduled
in accordance
maintenance
Warning
the engine is running.
new
in
with
79