Spring Pre-Load Adjustment; Rebound Damping Adjustment; Compression Damping Adjustment - Triumph Daytona 675 Handbook

Spring Pre-Load Adjustment

The spring pre-load adjusters are
located at the top of each fork.
To change the spring
rotate the adjuster clockwise to
increase pre-load, or
clockwise to decrease
Always set the pre-load adjusters
such that there are an equal number
of graduation lines visible on both
forks.
NOTE
• The motorcycle is delivered
from the factory with the
spring pre-load
position 5.
Rebound Damping
Adjustment
The rebound damping adjusters are
located at the top of each fork.
To change the rebound damping
force, rotate the slotted adjuster
clockwise to increase, or counter-
clockwise to decrease. Always count
the turns out from the screwed fully
in position and set both forks to the
same setting.
NOTE
• The motorcycle is delivered
from the factory with the
rebound set at position 6.
Maintenance and Adjustment
Compression Damping
Adjustment
The compression damping adjuster
is located near the bottom of both
forks, adjacent to the wheel spindle.
pre-load,
counter-
pre-load.
set at
cdlj
1 Compression
adjuster
To change the compression damping
force rotate the slotted adjuster
clockwise to increase, or counter-
clockwise to decrease. Always count
the number of turns out from the
fully screwed in position and set both
forks to the same setting.
NOTE
• The motorcycle is delivered
from the factory with the
compression damping set at
position 7.
1
damping force
97