Clock Adjustment - T-Set - Triumph Tiger XR Owner's Handbook Manual

To Disable the ABS
To access the ABS Disable function; with
the motorcycle
neutral, turn the ignition to the ON
position.
Press and release the SET button on
the left hand switch housing until SEtUP
is visible in the display screen.
Press and release the SCROLL button
until AbS is visible.
Press the SET button and On or OFF will
be displayed.
Press and release the SCROLL button
until OFF is visible in the display screen.
Pressing the SET button will disable the
ABS system; OFF will be displayed for
two seconds, and the ABS warning light
will be illuminated.
Press the HOME button and trip 1 will be
visible in the display screen.
Note:
• With the ABS disabled, the traction
control will still function.
To Enable the ABS
To enable the ABS system again, repeat
the ABS disable procedure and select
on.
Press the HOME button and trip 1 will be
visible in the display screen.
An alternative way to enable the ABS is
to turn the ignition off and on.
stationary and
General Information
Clock Adjustment – t-SEt
To reset the clock; with the motorcycle
in
stationary and in neutral turn the
ignition to the ON position. Press and
release the SET button on the left hand
switch housing until SEtUP is visible in
the display screen.
Press and release the SCROLL button
until t-SEt is visible.
1. Time set
Press the SET button again and either
24 Hr or 12 Hr clock will be shown. Press
the SCROLL button to select the desired
clock display and then press the SET
button. The hour display will start to
flash and the word Hour is visible in the
display screen.
Note:
• The hour/minute
increase when pressing up on the
SCROLL button or decrease when
pressing down on the SCROLL
button.
1
display will
41