Braking - Triumph Daytona 675 Handbook

NOTE
• The gearshift mechanism is
the 'positive stop' type. This
means that,
movement of the gearshift
pedal, you can only select
each gear, one after the
other, in ascending
descending order.
Warning
Do not shift to a lower gear at
speeds that will cause excessive
engine rpm (r/min). This can lock
the rear wheel causing loss of
control and an accident. Engine
damage may also
Down-shifting should be done such
that low engine speeds will be
ensured.

Braking

1
cdmi
1 Front brake lever (Daytona 675
shown)
How to Ride the Motorcycle
for each
WHEN BRAKING, OBSERVE
Close
leaving the clutch engaged to
or
allow the engine to help slow down
the motorcycle.
Downshift one gear at a time such
that the transmission is in first
gear when the motorcycle comes
to a complete stop.
When stopping, always apply both
brakes at the same time. Normally
the front brake should be applied a
little more than the rear.
be caused.
Downshift or fully disengage the
clutch as necessary to keep the
engine from stalling.
Never lock the brakes, as this may
cause
motorcycle and an accident.
cdmk
1 Rear brake pedal (Daytona 675
shown)
Warning
THE FOLLOWING:
the throttle completely,
loss of control of
1
the
57