Trip Computer Operation; Clock Adjustment - Triumph Daytona 675 Handbook

General Information
Trip Distance
The total distance travelled, since
the last reset.
Trip Time
The total time elapsed, since the last
reset.
Average Speed
The average speed is calculated from
when the trip computer was last
reset. After a reset the display will
show dashes until 1 mile/kilometer
has been covered.
Maximum Speed
The maximum speed achieved since
the last reset is displayed.
Lap Timer
Provides information on lap time,
maximum speed, average speed,
and distance travelled for up to 99
laps.

Trip Computer Operation

Display Section
When the ignition is switched on the
clock display is shown. To access the
trip computer information press the
'Scroll' button.
Press the 'Scroll' button repeatedly
until the desired display is visible.
The trip display will scroll through in
the order:
• Clock
• Lap Timer
• Average Speed
• Maximum Speed
28
• Trip Distance
• Trip Time
• Average Fuel Consumption
• Instantaneous Fuel
Consumption

Clock Adjustment

Warning
Do not attempt to adjust the clock
with the motorcycle in motion as
this may lead to loss of motorcycle
control and an accident.
2
3
1
4
1 Clock display
2 Hours read-out
3 Minutes read-out
4 Scroll button
5 Set button
To reset the clock, select the clock
display and press both 'Scroll' and
'Set' buttons together. After a short
time, the clock's hour display will
start to flash.
8
6
4
2
-1
0 MIN x 100
5