Trip Computer Reset; Lap Timer - Triumph Daytona 675 Handbook

To reset the hour display, ensure
that the hour display is still flashing
then depress the 'Scroll' button to
change the setting. Each individual
press will change the setting by one
digit.
When the correct hour display is
shown, press the 'Set' button. The
minutes display will begin to flash.
The minutes display is adjusted in
the same way as for the hours.
Once both hours and minutes are
correctly set, press the 'Set' button
to confirm the setting. The display
will cease to flash.

Trip Computer Reset

1
2
1 Trip computer display
2 Scroll button
3 Set button
General Information
Do not attempt to switch between
the trip computer display modes or
reset the trip computer with the
motorcycle in motion as this may
lead to loss of motorcycle control
and an accident.
To reset the trip computer only,
select one of the trip computer
displays, press the 'Scroll' and 'Set'
buttons
seconds. After 2 seconds, the trip
computer, not the clock, will reset.

Lap Timer

8
6
1
4
2
-1
0 MIN x 100
3
1 Lap timer display
The lap
following
number of laps, maximum speed,
average
travelled. Each display provides the
following information:
Warning
simultaneously for
6
4
2
0 -1
MIN
1
timer will provide
information: Lap time,
speed and distance
2
8
x 100
the
29