Warning
Do not attempt to switch between
odometer and trip meter display
modes or reset the trip meter with
the motorcycle in motion as this
may lead to loss of motorcycle
control and an accident.
Use
the
'Trip'
button
between
the
odometer
meter display modes. Press the 'Trip'
button repeatedly until the desired
display is visible. The display will
Scroll through in the order:
•
Odometer
•
Trip meter 1
•
Trip meter 2
To reset either of the trip meters,
select and display the trip meter to
be zeroed then press the 'Trip' and
'Set' buttons together for 2 seconds.
After 2 seconds, the trip meter on
display will reset to zero.
General Information
Clock/Trip Computer
to
switch
and
trip
1
1
Clock/trip computer display
2
Scroll button
The
clock
information appear on the same
display.
The
trip
indication
speed, lap time, time and distance,
all recorded and calculated since the
last reset.
Each display provides the following
information:
Instantaneous Fuel Consumption
An indication of the fuel consumption
at an instant in time.
Average Fuel Consumption
An indication of the average fuel
consumption, calculated from when
the trip computer was last reset.
After a reset the display will show
dashes until 0.1 miles/kilometer has
been covered.
8
6
4
2
-1
0
MIN
x
100
2
and
trip
computer
computer
provides
an
of
fuel
consumption,
27
1