Table of Contents
Advertisement
General operations
Connecting up external
antenna
To enable reception under adverse re-
ception conditions, an external GPS an-
tenna can be connected (not included).
For this purpose, a closable connecting
socket is located on the rear of the hou-
sing. If no external antenna is connected,
this connection must always be closed
again.
4003
Open the closure by pulling gently on
!
its upper surface.
!
Connect the external antenna up as de-
scribed in the manufacturer''s instruc-
tions.
21
Switching the Traffic Assist
Highspeed on/off
The unit is switched on and off using the
back key.
5014
Note:
Please
deactivate
the
moodlights while driving in your
vehicle in order to prevent visual
distraction from the road traffic!
Switching on
Press the back key for a few seconds.
!
The unit is switched on. The manufactu-
rer's logo appears on the touch screen.
5003
The following question appears shortly
thereafter: Comply with highway code
5002
Becker
If you agree with this request, press
!
the OK key.
Note:
The Traffic Assist Highspeed may only
be used in accordance with the applica-
ble national road traffic act!
Advertisement
Table of Contents
